Call +94 777 70 70 54

Mechanical & fire systems

One engineering partner for climate and fire safety.

Design, supply, installation and lifecycle maintenance of HVAC, fire detection, prevention and pump systems — engineered to the same documented method on every project, and delivered as integrated service lines under one accountable partner.

Explore our services Request a consultation
05Service lines
01Accountable partner
24/7Response cover
Integrated plant room illustration
End to endDesign, supply, install, commission and maintain
Code ledEngineered to recognised fire and building codes
CertifiedEquipment sourced through principal partnerships
LifecyclePlanned maintenance and emergency response
Meptura engineering seal

Our engineering culture

A discipline built the same way every time, on every site.

Meptura's practice is built on repeatable engineering method rather than any one person's memory of how a system was built last time — the same survey standard, the same design review, the same commissioning record, whether the project is a single retrofit or a full plant room.

Documented method

Design intent, calculations and commissioning records kept as a permanent project file, not a memory.

Code discipline

Every scope is checked against the fire and building codes it must satisfy, not against habit.

One accountable team

The team that surveys the building is accountable for the same building at handover and beyond.

Built for the long life of the asset

Systems specified and installed to be serviceable for the decades a building will actually stand.

About us

Mechanical and fire safety systems, delivered by one team.

Meptura brings HVAC, fire detection, fire prevention, fire pumps and protective equipment together under a single engineering practice. That means one survey, one design intent, one installation programme and one point of accountability for the life of the building.

We work across commercial, industrial and institutional projects — from new-build plant rooms through to retrofits of live, occupied facilities.

Single scopeMechanical and fire services under one contract
DocumentedFull commissioning and compliance records at handover
Principal partnersCertified equipment including Armstrong Fluid Technology
Local responseIsland-wide service and emergency call-out
Fire prevention systems illustration

At a glance

Our core services

Select a service to jump to the full scope of work, or read through the detail below.

01

HVAC Solutions

Climate control engineered for performance, comfort and lifecycle efficiency.

Design, supply, installation and maintenance of heating, ventilation and air-conditioning systems for commercial, industrial and institutional buildings — including chilled water plants, pumping systems and energy-efficient equipment selection.

Full scope
02

Fire Detection Systems

Identifying risk at the earliest possible stage — before it becomes an emergency.

Engineering and installation of intelligent fire alarm and detection systems — smoke, heat and multi-sensor detectors, control panels and monitoring integration — designed to identify fire risk early.

Full scope
03

Fire Prevention Systems

Containment and suppression engineered to recognised fire codes.

Sprinkler networks, hydrant systems and passive fire-protection measures engineered to recognised fire codes, reducing the risk of fire spread and protecting occupants, structures and critical assets.

Full scope
04

Fire Pumps

Dependable flow and pressure, at the moment it matters most.

Supply and commissioning of certified fire pump sets — including electric, diesel and variable-speed models sourced through our Armstrong Fluid Technology partnership — sized and installed to deliver dependable water flow and pressure when it matters most.

Full scope
05

Personal Protective Equipment

Certified protection for industrial, fire-response and facility teams.

Supply of certified personal protective equipment for industrial, fire-response and facility teams, including respiratory protection, protective clothing and safety accessories that meet occupational safety requirements.

Full scope
HVAC solutions illustration

01 — Full scope

HVAC Solutions

Climate control engineered for performance, comfort and lifecycle efficiency across commercial, industrial and institutional buildings.

  • Heat load calculation, system selection and full mechanical design
  • Chilled water plants, air handling units and ducted distribution
  • Pumping systems, pipework, insulation and plant room integration
  • Energy-efficient equipment selection for new builds and retrofits
  • Commissioning, balancing and planned preventive maintenance
Chilled waterVRF & splitVentilationRetrofitMaintenance
Fire detection systems illustration

02 — Full scope

Fire Detection Systems

Intelligent alarm and detection engineered to identify risk at the earliest possible stage — before it becomes an emergency.

  • Addressable and conventional fire alarm panel design
  • Smoke, heat and multi-sensor detector layout and coverage
  • Manual call points, sounders and visual alarm devices
  • Loop wiring, containment and cause-and-effect programming
  • Building management and remote monitoring integration
AddressableMulti-sensorCause & effectBMS integration
Fire prevention systems illustration

03 — Full scope

Fire Prevention Systems

Containment and suppression engineered to recognised fire codes, protecting occupants, structures and critical assets.

  • Wet and dry sprinkler networks, risers and ceiling mains
  • Hydrant and hose reel systems with landing valves
  • Hydraulic calculation and code compliance documentation
  • Passive fire protection, compartmentation and penetration sealing
  • Flow testing, commissioning and periodic inspection
SprinklersHydrantsPassive protectionHydraulics
Fire pumps illustration

04 — Full scope

Fire Pumps

Certified pump sets sized and installed to deliver dependable flow and pressure at the moment it matters most.

  • Electric, diesel and variable-speed fire pump sets
  • Equipment sourced through our Armstrong Fluid Technology partnership
  • Duty, standby and jockey pump configuration and sizing
  • Suction and discharge headers, controllers and break tanks
  • Witnessed performance testing and commissioning records
ElectricDieselVariable speedJockey setsArmstrong

Pump range

Pump types available through our Armstrong partnership

Every set is specified against the duty point, not sold off a shelf — sourced through our Armstrong Fluid Technology partnership and configured with electric, diesel or variable-speed drive as the application requires.

Horizontal End Suction

The general-purpose workhorse — economical, straightforward to maintain, sized for standard commercial and industrial duty.

Horizontal Split Case

Angled-split casing for high-flow duty, with suction and discharge centrelines aligned for straightforward in-line piping.

Vertical In-Line

Up to 60% less floor space than an equivalent split-case set, with no offset piping or motor realignment on site.

Vertical Multistage

High head from a compact footprint, for booster duty and buildings where floor space at the plant room is limited.

Vertical Turbine

The only configuration rated to draw from below-grade sources — reservoirs, sumps and underground storage tanks.

Variable-speed & sensorless

Intelligent, self-sensing control for HVAC circulation — matching flow to demand rather than running at fixed speed.

05 — Full scope

Personal Protective Equipment

Certified protection for industrial, fire-response and facility teams, meeting occupational safety requirements across day-to-day operations and emergency response.

Respiratory protection

Filtering facepieces, half and full masks, cartridges and self-contained breathing apparatus for confined and contaminated environments.

Protective clothing

Flame-retardant coveralls, turnout gear, high-visibility wear and chemical-resistant clothing selected against the task risk assessment.

Safety accessories

Head, eye, hearing and hand protection, fall-arrest harnesses, gas detection and the consumables that keep them serviceable.

In the field

What an installation looks like

Representative engineering illustrations of the plant rooms and rooftop installations our service lines are built around — from pump room to rooftop.

Illustration of a fire pump room with duty, standby and jockey pump sets
Fire pump roomsDuty, standby and jockey sets, witnessed and commissioned on a shared header.
Illustration of a chilled water plant room with chiller, AHU and inline pumps
Chilled water plantsChiller, air handling and pumping specified and integrated as one system.
Illustration of a rooftop plant installation with condensing units and cooling tower
Rooftop installationsCondensing units and cooling towers, load-tested before handover.

Industries

Where our systems are installed

The same engineering discipline, adapted to the operating risk and uptime demands of each sector.

Commercial & offices

Chilled water and VRF systems, addressable detection and sprinkler coverage for multi-tenant buildings.

Industrial & manufacturing

Process ventilation, high-hazard suppression, fire pump sets and protective equipment programmes.

Hospitality

Guest-comfort air conditioning, kitchen extract, and detection designed around occupied, 24-hour operation.

Healthcare

Filtered ventilation for clinical areas, resilient plant, and detection with phased evacuation logic.

Education

Ventilation for teaching spaces, hydrant and hose reel systems, and manageable maintenance regimes.

Warehousing & logistics

High-bay sprinkler design, hydraulic calculation, and pump sets sized for large-volume storage risk.

How we work

From survey to lifecycle support

A single accountable route from first site visit through to planned maintenance — no handoffs between disconnected contractors.

STEP 01

Survey & assess

Site visit, risk assessment and review of existing services against current code requirements.

STEP 02

Design & specify

Load calculations, hydraulic modelling, equipment selection and a documented scope of work.

STEP 03

Install & commission

Supply, installation, witnessed testing and handover with full commissioning records.

STEP 04

Maintain & respond

Planned preventive maintenance, statutory inspection and emergency response cover.

Contact

Request a consultation

Tell us about the building, the risk and the timeline. We will arrange a site visit and come back with a documented scope.

Talk to the team

Direct line for project enquiries, service contracts and emergency call-outs.